How To Change Sand In Pool Filter
The regular maintenance that you lot have to exercise to keep the performance of your sand filter is by irresolute the sand of the unit. Commonly, once every 3 to v years you have to change the sand of your pool filter.
You can consider changing the sand of your pool filter when yous discover these signs:
- Slower functioning– Of course, when the sand has been in the filter for besides long, it will reduce the performance of the system. Y'all will detect that the pool water gets cloudy more often.
- Leaks on Multiport Valves – One of the factors that cause this problem is the aged sand of the filter.
- Pressure Issues– Equally the sand age, you volition find the pressure buildup which reduces the filtering performance.
(You lot may also like: How to Raise Cyanuric Acid in Puddle with 3 Uncomplicated Steps Safely)
When you are planning on changing the sand in your pool filter, the tutorial on How to Change Sand in Pool Filter below will show you how.
How to Change Sand in Pool Filter
Changing the sand of your pool filter is not a actually complicated job that you lot can get done in no time. There's no need to telephone call a pro, you just have to ready some necessary tools and some new packs of sand.
Set up these supplies:
- Pool filter sand
- Duct tape
Gear up these tools:
- Shop-vac
- Garden hose
- Screwdriver
- Flashlight
- Backwash hose
- Utility knife
- Dust mask
You need to gear up those supplies and tools for this tutorial.
Drain the Filter
Before you drain the h2o of your pool filter, yous have to completely plough it off. Exist sure to check the timer and turn information technology off as well. Yous can't have your filter on without the water within it since it can cause serious damage. Since draining may have quite a long time, y'all can start draining information technology in the morning and offset the process of replacing the sand in the afternoon.
- Observe the switch of the filter and turn the filter off.
- You can also cut the ability for more than safety.
- Completely drain the h2o.
Remove the Multiport Valve and Pipes
When the water is completely drained, you can remove the valves along with the pipes.
- On top of the filter tank, you will find the clamp that secures the valve, Unscrew the clamp with the screwdriver and remove it.
- If the pipes come up with unions, you tin simply disconnect them from the filter. Simply, y'all may need to cut it with a saw if they are permanently fastened, be conscientious if you take to cut the pipes or consider calling an expert.
- To ease the task in the near future, you can install the fittings on the new pipes.
- Twist the multiport valve gently and lift it carefully. Avoid damaging the part of the filters inside the tank.
Shield the Standpipe
You will find an open up standpipe once yous remove the multiport valve and you need to cover information technology so the sand won't contaminate your pool water.
- Utilize duct tape to cover the open pipe.
- Make sure it'south covered properly merely likewise easy to remove.
Remove the Former Sand
Now, it'southward fourth dimension to remove the erstwhile dirty sand from the tank. It's so recommended for y'all to utilize shop vac to remove the sand instead of scooping them out with hands, it will be a very exhausting job that will take ages to terminate.
- Insert the nozzle of the shop vac and suck out the quondam sand within the tank from the bottom.
- Exercise this step gently as you may damaging the fragile components at the lesser of the tank.
- Wear gloves and mask if necessary.
(Cheque this out: How to Clear a Cloudy Pool with Blistering Soda with Merely four Steps)
Clean Upwardly the Tank
When you are sure that yous accept sucked out as much sand as you can, you have to rinse the tank thoroughly with h2o.
- Apply the garden hose to make clean out the remaining side within the tank, you tin can utilize a spray nozzle for more constructive effort.
- Make clean the exterior part of the tank likewise.
- If necessary, you can inspect the remaining sand inside the tank with a flashlight.
Add together New Sand
Prepare your pool filter sand since it's time for you lot to add them to your filter. Wearable gloves and a dust mask to protect yourself.
- Wait, before calculation the sand, you need to fill the tank with some water. Only add it a petty fleck of water which is plenty to work as the cushion when the sand touches the lesser of the tank to avoid damaging the laterals.
- Read the manual of your puddle filter to find out the amount of sand that yous need.
- Slowly pour the sand into the filter.
- If you lot want to improve the performance of your pool filter, you lot can mix some cups of Diatomaceous World (D.E) powder with the new sand.
- Fill the tank with h2o until it reaches the level of the new sand.
Reassemble the Components
After the sand is safely set inside the tank, you have to attach all the components that yous have removed. The multiport valve, clamp, and pipes should be secured properly over again.
Aftermath the Filter
Before getting the filter to work, you need to aftermath it to remove the debris that may come with the new sand.
- Adhere the aftermath hose to the filter and position the valve to the backwash mode.
- Plough on the pump for nigh two minutes.
- Turn off the pump, position the valve into the rinse way, and rinse the filter for about one minute. Run across the sight glass to check whether the water is make clean enough or not.
- Turn off the pump.
Savor the Filter
At present, your brand new sand is ready to work and so you can turn dorsum on the filter.
- Position the valve to the filter mode.
- Turn on the pump again.
(Recommended to read: How to Level Basis for Pool with Only vi Steps | Fun DIY Project)
Then that is the tutorial on How to Change Sand in Pool Filter that you can follow easily!
How To Change Sand In Pool Filter,
Source: https://www.divesanddollar.com/how-to-change-sand-in-pool-filter/
Posted by: bransonhisherecur.blogspot.com
0 Response to "How To Change Sand In Pool Filter"
Post a Comment